The Optima bath, showing simple plain lines. The top of the bath is flat with no raised lips mor indents. The tap holes can be drilled on site, but the overflow and waste holes are drilled. Panels are available for the front and end if required.
The bath is manufactured from 5mm acrylic sheet with fiberglass reinforcement and a fully encapsulated baseboard, and comes with a strong tubular steel cradle system, adjustable feet and wall anchor brackets.
Optima comes in 1500, 1600 or 1700mm long x 700mm wide.
The toilet pan has an open back and is suitable for a side exit soil pipe, or for a rear exit or a verticle soil pipe connection. The cistern fittings are supplied, including the inlet valve and a dual push button flush mechanism with chrome button assembly. The overflow is an internal type, overflow water being directed into the pan.
Note the upstand on the cistern lid.
The seat and cover illustrated here are mdf with a pine finish veneer with chrome hinges..
The basin is 570mm wide with 2 tap holes and an integral overflow. It sits on a full ceramic pedestal which is open at the back for easy plumbing.
Notice the upstand behind the tap ledge, lending a tradional flavour.
A matching bidet is available as an extra.
The bidet is only available in a 1 tap hole version with no ascending spray. A bidet mixer with a pop up waste is available from the Pinewood range, although this illustration shows a single lever mixer tap.
